gemian/pulseaudio-modules-droid
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
pulseaudio-modules-droid/README
Juho Hämäläinen 1d47383623 README: Add description of reconfiguring droid source.
2019-10-07 11:33:46 +03:00

411 lines
15 KiB
Text
Raw Blame History

PulseAudio Droid modules
========================
Building of droid modules is split to two packages
* common (and common-devel) which contains shared library code for use in
PulseAudio modules in this package and for inclusion in other projects
* droid with actual PulseAudio modules
Supported Android versions:
* 4.1.x with Qualcomm extensions (tested with 4.1.2)
* 4.2.x
* 4.4.x
* 5.x
* 6.0.x
* 7.x
* 8.x
Headers for defining devices and strings for different droid versions are in
src/common/droid-util-audio.h (legacy headers for Jolla 1 in droid-util-41qc.h).
When new devices with relevant new enums appear, add enum check to configure.ac.
CC_CHECK_DROID_ENUM macro will create macros HAVE_ENUM_FOO, STRING_ENTRY_IF_FOO
and FANCY_ENTRY_IF_FOO if enum FOO exists in HAL audio.h.
For example:
# configure.ac:
CC_CHECK_DROID_ENUM([${DROIDHEADERS_CFLAGS}], [AUDIO_DEVICE_OUT_IP])
CC_CHECK_DROID_ENUM([${DROIDHEADERS_CFLAGS}], [AUDIO_DEVICE_OUT_OTHER_NEW])
# and then in droid-util-audio.h add macros to proper tables:
/* string_conversion_table_output_device[] */
STRING_ENTRY_IF_OUT_IP
STRING_ENTRY_IF_OUT_OTHER_NEW
/* string_conversion_table_output_device_fancy[] */
FANCY_ENTRY_IF_OUT_IP("output-ip")
FANCY_ENTRY_IF_OUT_OTHER_NEW("output-other_new")
In addition to the above macros there are also now defines
HAVE_ENUM_AUDIO_DEVICE_OUT_IP and HAVE_ENUM_AUDIO_DEVICE_OUT_OTHER_NEW.
The purpose of droid-modules is to "replace AudioFlinger". Many hardware
adaptations use ALSA as the kernel interface, but there is no saying that
someday vendor would create and use something proprietary or otherwise
different from ALSA. Also the ALSA implementation in droid devices may contain
funny ways to achieve things (notable example is voicecall) which might be
difficult to do if interfacing directly with ALSA to replace AudioFlinger.
Also using ALSA directly would mean that the whole HAL adaptation would need to
be ported for each new device adaptation. With droid-modules this is much more
simpler, with somewhat stable HAL (HALv3 as of now, also different vendors add
their own incompatible extensions) API. In best scenarios using droid-modules
with new device is just compiling against target.
Components
==========
common
------
The common part of PulseAudio Droid modules contains library for handling
most operations towards audio HAL.
### Audio policy configuration parsing
To populate our configuration structs there exists two parsers, legacy parser
for old .conf format present in Android versions 7.0 and older and new xml
format present from version 7.0 upwards. The legacy format is obsoleted in
version 7.0 but by default still in use and most 7.0 adaptations probably
contain the legacy format. But 8.0 adaptations and up start to include only
the new style xml format configuration files.
### Configuration files
By default new style xml format is tried first and if it is not found old
config is read next. If the configuration is in non-default location for
some reason "config" module argument (available for all modules, card, sink,
and source) can be used to point to the configuration file location.
By default files are tried in following order,
/vendor/etc/audio_policy_configuration.xml (new xml format)
/vendor/etc/audio_policy.conf (legacy format)
/system/etc/audio_policy_configuration.xml (new xml format)
/system/etc/audio_policy.conf (legacy format)
module-droid-card
-----------------
Ideally only module-droid-card is loaded and then droid-card loads
configuration, creates profiles and loads sinks and sources based on the
selected profile.
default profile
---------------
When module-droid-card is loaded with default arguments, droid-card will try
to create a default profile (called surprisingly "default"). The default
profile will try to merge useful output and input streams to one profile,
to allow use of possible low latency or deep buffer outputs.
For example configuration with
audio_hw_modules {
primary {
outputs {
primary {}
deep_buffer {}
}
inputs {
primary {}
voice_rx {}
}
}
other {
...
}
}
The default profile would contain two sinks, sink.primary and sink.deep_buffer
and one source, source.droid.
Usually this default profile is everything that is needed in normal use, and
additional profiles created should be needed only for testing things out etc.
virtual profiles
----------------
In addition to aforementioned card profiles, droid-card creates some additional
virtual profiles. These virtual profiles are used when enabling voicecall
routings etc. When virtual profile is enabled, possible sinks and sources
previously active profile had are not removed.
As an illustration, following command line sequence enables voicecall mode and
routes audio to internal handsfree (ihf - "handsfree speaker"):
(Before starting, droid_card.primary is using profile primary-primary and
sink.primary port output-speaker)
pactl set-card-profile droid_card.primary voicecall
pactl set-sink-port sink.primary output-parking
pactl set-sink-port sink.primary output-speaker
After this, when there is an active voicecall (created by ofono for example),
voice audio starts to flow between modem and audio chip.
To disable voicecall and return to media audio:
pactl set-card-profile droid_card.primary primary-primary
pactl set-sink-port sink.primary output-parking
pactl set-sink-port sink.primary output-speaker
With this example sequence sinks and sources are the ones from primary-primary
card profile, and they are maintained for the whole duration of the voicecall
and after.
This sequence follows the droid HAL idea that when changing audio mode the mode
change is done when next routing change happens. output-parking and
input-parking ports are just convenience for PulseAudio, where setting already
active port is a no-op (output/input-parking doesn't do any real routing
changes).
Current virtual profiles are:
* voicecall
* voicecall-record
* communication
* ringtone
Communication profile is used for VoIP-like applications, to enable some
voicecall related algorithms without being in voicecall. Ringtone profile
should be used when ringtone is playing, to again enable possible loudness
related optimizations etc. Voicecall-record profile can be enabled when
voicecall profile is active.
debugging profiles
------------------
If needed in favour of default profile one can opt to creating combinations
of all output and input definitions in a module definition. This can be
done by passing "default=false" to module-droid-card. Module argument
module_id will then defines which module to load (by default "primary").
Without default profile all input and output definitions are translated
to PulseAudio card profiles. For example configuration with
audio_hw_modules {
primary {
outputs {
primary {}
lpa {}
}
inputs {
primary {}
}
}
other {
...
}
}
Would map to card profiles (<output>-<input>) primary-primary and lpa-primary.
module-droid-sink and module-droid-source
-----------------------------------------
Normally user should not need to load droid-sink or droid-source modules by
hand, but droid-card loads appropriate modules based on the active card
profile.
Output and input ports for droid-sink and droid-source are generated from the
audio_policy.conf, where each device generates (usually) one port, for example:
audio_hw_modules {
primary {
outputs {
primary {
devices = AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADPHONE
}
lpa {}
}
inputs {
primary {
devices = AUDIO_DEVICE_IN_BUILTIN_MIC
}
}
}
}
Would create following ports for sink.primary:
* output-speaker
* output-earpiece
* output-wired_headphone
* output-speaker+wired_headphone
And for source.primary:
* input-builtin_mic
Only exception to one device one port rule is if output device list has both
OUT_SPEAKER and OUT_WIRED_HEADPHONE, then one additional combination port is
generated. How the devices are called in sink and source ports are defined in
droid-util-XXX.h
Changing output routing is then as simple as
pactl set-sink-port sink.primary output-wired_headphone
Sink or source do not track possible headphone/other wired accessory plugging,
but this needs to be handled elsewhere and then that other entity needs to
control sinks and sources. (For example in SailfishOS this entity is OHM with
accessory-plugin and pulseaudio-policy-enforcement module for actually making
the port switching)
Droid source automatic reconfiguration
--------------------------------------
As droid HAL makes assumptions on (input) routing based on what the parameters
for the stream are (device, sample rate, channels, format, etc.) normal
PulseAudio sources are a bit inflexible as only sample rate can change after
source creation and even then there are restrictions based on alternative
sample rate value.
To overcome this and to allow some more variables affecting the stream being
passed to the input stream droid source is modified to reconfigure itself
with the source-output that connects to it. This means, that just looking at
inactive source from "pactl list" listing doesn't tell the whole story.
Droid source is always reconfigured with the *last* source-output that
connects to it, possibly already connected source-outputs will continue
to read from the source but through resampler.
For example,
1) source-output 44100Hz, stereo connects (so1)
a) source is configured with 44100Hz, stereo
b) so1 connects to the source without resampler
2) source-output 16000Hz, mono connects (so2)
a) so1 is detached from the source
b) source is configured with 16000Hz, mono
c) so2 connects to the source without resampler
d) resampler is created for so1, 16000Hz, mono -> 44100Hz stereo
f) so1 is re-attached to the source through resampler
3) source-output 16000Hz, mono connects (so3)
a) so1 and so2 are detached from the source
b) so3 connects to the source without resampler
c) so1 is re-attached to the source through resampler
d) so2 is attached to the source
Classifying sinks and sources
-----------------------------
Certain property values are set to all active sinks and sources based on their
functionality to ease device classification.
Currently following properties are set:
* For droid sinks
* droid.output.primary
* droid.output.low_latency
* droid.output.media_latency
* droid.output.offload
* For droid sources
* droid.input.builtin
* droid.input.external
If the property is set and with value "true", the sink or source should be
used for the property type. If the property is not defined or contains
value "false" it shouldn't be used for the property type.
For example, we might have sink.primary and sink.low_latency with following
properties:
* sink.primary
* droid.output.primary "true"
* droid.output.media_latency "true"
* sink.low_latency
* droid.output.low_latency "true"
There also may be just one sink, with all the properties defined as "true"
and so on.
Right now there exists only one source (input device) which will always have
both properties as true.
Quirks
------
There are some adaptations that require hacks to get things working. These
hacks can be enabled or disabled with module argument "quirks". Some quirks
are enabled by default with some adaptations etc.
Currently there are following quirks:
* input_atoi
* Enabled by default with Android versions 5 and up.
* Due to how atoi works in bionic vs libc we need to pass the input
route a bit funny. If input routing doesn't work switch this on or off.
* set_parameters
* Disabled by default.
* Some adaptations need to use hw module's generic set_parameters call
to change input routing. If input routing doesn't work switch this
on or off. (mostly just older adaptations)
* close_input
* Enabled by default.
* Close input stream when not in use instead of suspending the stream.
Cannot be changed when multiple inputs are merged to single source.
* unload_no_close
* Disabled by default.
* Don't call audio_hw_device_close() for the hw module when unloading.
Mostly useful for tracking module unload issues.
* no_hw_volume
* Disabled by default.
* Some broken implementations are incorrectly probed for supporting hw
volume control. This is manifested by always full volume with volume
control not affecting volume level. To fix this enable this quirk.
* output_make_writable
* Disabled by default.
* Some implementations modify write buffer in-place when this should
not be done. This can result in random segfaults when playing audio.
As a workaround make the buffer memchunk writable before passing to
audio HAL.
* realcall
* Disabled by default.
* Some vendors apply custom realcall parameter to HAL device when
doing voicecall routing. If there is no voicecall audio you can
try enabling this quirk so that the realcall parameter is applied
when switching to voicecall profile.
* unload_call_exit
* Disabled by default.
* Some HAL module implementations get stuck in mutex or segfault when
trying to unload the module. To avoid confusing segfaults call
exit(0) instead of calling unload for the module.
For example, to disable input_atoi and enable close_input quirks, use module
argument
quirks=-input_atoi,+close_input
Volume control during voicecall
-------------------------------
When voicecall virtual profile is enabled, active droid-sink is internally
switched to voicecall volume control mode. What this means is changing the sink
volume or volume of normal streams connected to the sink do not change active
voicecall volume. Special stream is needed to control the voicecall volume
level. By default this stream is identified by stream property media.role,
with value "phone". This can be changed by providing module arguments
voice_property_key and voice_property_value to module-droid-card.
Usually droid HAL has 6 volume levels for voicecall.
Temporary sink audio routing
----------------------------
It is possible to add temporary route to sink audio routing with specific
stream property. When stream with property key
droid.device.additional-route connects to droid-sink, this extra route is set
(if possible) as the enabled route for the duration of the stream.
For example, if droid-sink has active port output-wired_headphone:
paplay --property=droid.device.additional-route=AUDIO_DEVICE_OUT_SPEAKER a.wav
As long as the new stream is connected to droid-sink, output routing is
SPEAKER.
module-droid-keepalive
----------------------
Keepalive module is MCE (https://github.com/nemomobile/mce) specific module
tracking sink/source activity and keeping a WAKELOCK when there are active
streams.
Reference in a new issue View git blame Copy permalink