pogmommy/nmrpflash
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Update readme

Browse source
This commit is contained in:
Joseph C. Lehner 2020-09-10 12:10:15 +02:00
parent cfe4ab8078
commit 5acfbed385
1 changed files with 4 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

22
README.md
View file

@ -93,7 +93,7 @@ packages (exact names will vary depending on your distribution).
Install [Npcap](https://nmap.org/npcap/). For `nmrpflash` versions prior Install [Npcap](https://nmap.org/npcap/). For `nmrpflash` versions prior
to 0.9.14, install Npcap with "WinPcap Compatibility" enabled. to 0.9.14, install Npcap with "WinPcap Compatibility" enabled.
Version 0.9.13 is the last version to support Windows XP. Version 0.9.13 was the last version to support Windows XP.
###### "No suitable network interfaces found." ###### "No suitable network interfaces found."
@ -128,14 +128,6 @@ address assigned to the target (e.g. if your network is `192.168.1.0/24`, specif
IP address, such as `-a 192.168.1.252`), and `-A` to change the IP address used for the IP address, such as `-a 192.168.1.252`), and `-A` to change the IP address used for the
network interface. network interface.
This error message could also indicate a bug in the TFTP code; try using an external tftp
client (busybox in this example), by specifying the `-c` flag instead of the `-f` flag:
`# nmrpflash -i eth0 -c 'busybox tftp -p -l EX2700-V1.0.1.8.img $IP'`
The environment variable `IP` is set by `nmrpflash` (other environment variables
are: `MAC`, `PORT`, `NETMASK`).
###### "Timeout while waiting for CLOSE_REQ." ###### "Timeout while waiting for CLOSE_REQ."
After a successful file upload, `nmrpflash` waits for up to 5 minutes for an After a successful file upload, `nmrpflash` waits for up to 5 minutes for an
@ -160,14 +152,6 @@ the network cable has been connected, and your computer tries to reconfigure tha
interface (NetworkManager on Linux does this for example) - this can usually be interface (NetworkManager on Linux does this for example) - this can usually be
disabled. disabled.
An alternative would be to add `-c 'ifconfig <interface> <ip>'` to the command line,
for example:
`# nmrpflash -i eth0 -a 192.168.1.1 -f firmware.bin -c 'ifconfig eth0 192.168.1.2'`
This will execute the command specified by `-c` prior to starting the TFTP upload (in
this case setting the IP address to 192.168.1.2).
###### "Received keep-alive request." ###### "Received keep-alive request."
This usually means that flashing is in progress. On some devices, you may get a few This usually means that flashing is in progress. On some devices, you may get a few
@ -200,8 +184,8 @@ flashing via the web interface.
###### "bind: Cannot assign requested address" ###### "bind: Cannot assign requested address"
Specify the address of the router, and address of your computer, using Specify the address of the router (`-a`), and address of your computer (`-A`).
`-A` and `-a`. For example: For example:
`-A 10.0.0.2 -a 10.0.0.1` `-A 10.0.0.2 -a 10.0.0.1`