From 913f261a0c87b69ab9499305a9d3c3c31ee93f3d Mon Sep 17 00:00:00 2001 From: "Joseph C. Lehner" Date: Mon, 6 Jul 2020 11:28:30 +0200 Subject: [PATCH] Update README.md --- README.md | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/README.md b/README.md index 1c68596..c16efc3 100644 --- a/README.md +++ b/README.md @@ -40,9 +40,10 @@ Ethernet cable. The device running `nmrpflash` must be connected to the same network, using either Wi-Fi or Ethernet. Usage sequence of events: -1. Connect ethernet cable from computer to router's LAN1 -2. Run nmrpflash on command line -3. Turn on the router. +1. Turn off the router +2. Connect ethernet cable from computer to router's LAN1 +3. Run nmrpflash on command line +4. Turn on the router. All available network interfaces can be listed using @@ -99,12 +100,8 @@ C:\> net start npf ###### "No response after 60 seconds. Bailing out." -The router did not respond. Always run `nmrpflash` in the following -manner: - -* Turn off the router. -* Run `nmrpflash`. -* Turn on the router. +The router did not respond. Always run `nmrpflash` in the sequence +described above! If that still doesn't work, you can try "blind mode", which can be invoked using `-B`. Note that you also have to specify your router's