nmrpflash - Netgear Unbrick Utility

This program uses Netgear's [NMRP protocol] (http://www.chubb.wattle.id.au/PeterChubb/nmrp.html) to flash a new firmware image to a compatible device. This utility has been tested with a Netgear EX2700, but is likely to work on many others as well.

Prebuilt binaries for Linux, OS X and Windows are available here (WinPcap is required on Windows).

Usage: nmrpflash [OPTIONS...]

Options (-a, -i and -f are mandatory):
 -a <ipaddr>     IP address to assign to target device
 -f <firmware>   Firmware file
 -i <interface>  Network interface directly connected to device
 -m <mac>        MAC address of target device (xx:xx:xx:xx:xx:xx)
 -M <netmask>    Subnet mask to assign to target device
 -t <timeout>    Timeout (in milliseconds) for regular messages
 -T <timeout>    Time to wait after successfull TFTP upload
 -p <port>       Port to use for TFTP upload
 -U              Test TFTP upload
 -v              Be verbose
 -V              Print version and exit
 -L              List network interfaces
 -h              Show this screen

Using nmrpflash

Connect your Netgear router to your computer using a network cable. Assign a static IP address to the network adapter that's plugged into the Netgear router.

For this example, we'll assume that your network interface is eth0. First, we have to assign a static IP address to our network interface. In this example, we'll use 192.168.1.2. All available network interfaces can be listed using

$ nmrpflash -L
eth0      192.168.1.2  f2:11:a1:02:03:b1

Now we can nmrpflash. The argument for the -a option needs to be a free IP address from the same subnet as the one used by your network interface. We'll use 192.168.1.254. Firmware images can usually be downloaded directly from netgear. For details on how to do this, see here. Power on your device immediately after starting nmrpflash.

$ nmrpflash -i eth0 -a 192.168.1.254 -f EX2700-V1.0.1.8.img
Advertising NMRP server on eth0 ... /
Received configuration request from a4:2b:8c:00:00:01.
Sending configuration: ip 192.168.1.254, mask 255.255.255.0.
Uploading EX2700-V1.0.1.8.img ... OK
Waiting for remote to respond.
Remote finished. Closing connection.

Common issues

"No suitable network interfaces found."

If you're not on Windows, rerun nmrpflash -L using sudo. In any case, use -vvvL to see more detailed messages, and file a bug report if applicable.

"No response after 60 seconds. Bailing out."

The router did not respond. Try running nmrpflash with -m and specify your router's MAC address. It's also entirely possible that your device does not support the NMRP protocol.

"Timeout while waiting for 0x04."

After a successful file upload, nmrpflash waits for up to 120 seconds for an answer from your device. You can increase this by specifying a longer timeout using -T switch (argument is in seconds).

It's entirely possible that the image was flashed successfully, but the operation took longer than 120 seconds.

Building and installing

Linux, Mac OS X, BSDs

$ make && sudo make install

Windows

The repository includes a DevCpp project file (nmrpflash.dev). Download the latest WinPcap Developer Pack and extract it into the root folder of the nmrpflash sources.

Obtaining firmware images

Firmware images can be downloaded directly from Netgear's FTP servers. For the Netgear EX2700 for example, download ftp://updates1.netgear.com/ex2700/ww/fileinfo.txt. At the top there should be an entry like this:

[Major1]
file=EX2700-V1.0.1.8.img
...

The download link for the latest firmware image for this device is thus: ftp://updates1.netgear.com/ex2700/ww/EX2700-V1.0.1.8.img. Substitute ex2700 for your device (wndr4300, wndr3700, r6100, etc.). If neccessary, substitute ww (world-wide) for a specific region.