* chore: Remove deprecated `Makefile.toml`
which really should have been deleted as part of #2012. This hasn't been
updated for more than 2 years now and I don't expect anyone to still use
this. Our build process is now managed by `cargo xtask`.
* Cargo: Update the Rust toolchain to 1.84.0
from 1.75.0 which has been deprecated for a while now. Along with this
change, the `wasm32-wasi` target is no longer available (see subsequent
commit for additional info).
* chore: Rename `wasm32-wasi` to `wasm32-wasip1`
as required by the Rust project. The `wasm32-wasi` target name has been
retired and will likely be reused at a later time, although to express
an entirely different target (i.e. implementation of the WASI standard).
For additional information, see:
- https://blog.rust-lang.org/2024/04/09/updates-to-rusts-wasi-targets.html
- https://blog.rust-lang.org/2024/09/05/Rust-1.81.0.html#wasi-01-target-naming-changed
* chore: Drop `rust-analysis` component
from the `rust-toolchain.toml` definition. This was added way back in
2021 via 8688569a, and while I'm not sure what it expressed back then,
nowadays it refers to [Metadata for RLS][1], which apparently was an
early language server implementation and has long since been replaced by
*rust-analyzer*.
We don't want to propose or enforce the use of a specific toolchain and
in any case, setting this up properly is the job of a developers
IDE/Editor.
[1]:
1f06e3b31d/doc/user-guide/src/concepts/components.md (previous-components)
* chore: Adhere to type rename
from `std::panic::PanicInfo` to `std::panic::PanicHookInfo`, which was
introduced in Rust 1.81.0. For additional information, see:
- https://releases.rs/docs/1.81.0/#compatibility-notes
- https://github.com/rust-lang/rust/pull/115974/
* fix(utils/data): Adhere to expected case
in match arm patterns, since the expression being matched against has
been modified using `to_ascii_lowercase`. Hence, we cannot have upper
case ASCII chars in the expressions (these arms were previously no-ops).
* fix(utils): Derive `Hash` manually
in `input/layout` since the `PartialEq` trait is also implemented
manually. Previously the `Hash` impl wasn't consistent with the `Eq`
impl, which can have weird effects when using these types in e.g.
`HashMap`s or similar types. For additional information, see:
- https://rust-lang.github.io/rust-clippy/master/index.html#derived_hash_with_manual_eq
- https://doc.rust-lang.org/stable/std/hash/trait.Hash.html#hash-and-eq
* fix(utils): Derive `Hash` manually
in `pane_size` since the `PartialEq` trait is also implemented manually.
Previously the `Hash` impl wasn't consistent with the `Eq` impl, which
can have weird effects when using these types in e.g. `HashMap`s or
similar types. For additional information, see:
- https://rust-lang.github.io/rust-clippy/master/index.html#derived_hash_with_manual_eq
- https://doc.rust-lang.org/stable/std/hash/trait.Hash.html#hash-and-eq
* fix(server): Don't redeclare variables
with their same names. Latest rust toolchains reject this code.
* chore(actions): Use non-archived toolchain setup
for the Rust toolchain. The previously used action has been archived
over a year ago. The new one should also support reading our
`rust-toolchain.toml`, so we no longer have to keep track of the
toolchain in multiple places.
* chore(actions): Add some space to YAML files
to make them better visually parsable.
* ci: Remove toolchain update Job
since as far as I can tell, this isn't used any more.
* ci: Fix invalid actions specification
and only request an action without running other code.
* CHANGELOG: Add PR #3945.
* work
* almost done with command protobuffers
* done translating command data structures
* mid transferring of every command to protobuff command
* transferred plugin_command.rs, now moving on to shim.rs
* plugin command working with protobufs
* protobuffers in update
* protobuf event tests
* various TODOs and comments
* fix zellij-tile
* clean up prost deps
* remove version mismatch error
* fix panic
* some cleanups
* clean up event protobuffers
* clean up command protobuffers
* clean up various protobufs
* refactor protobufs
* update comments
* some transformation fixes
* use protobufs for workers
* style(fmt): rustfmt
* style(fmt): rustfmt
* chore(build): add protoc
* chore(build): authenticate protoc
- avoid building all workspace crates with `cargo x build` (only plugins and main binary)
- only set the target triple in tests for plugins
- add new profile for `cargo x run` to build with optimized dependencies => FAST plugins when developing (thanks [Bevy Book](https://bevyengine.org/learn/book/getting-started/setup/#compile-with-performance-optimizations) for the idea)
- use https://github.com/Swatinem/rust-cache to avoid rebuilding dependencies every time in ci
- split `Build & Test` job into two so they run in parallel
- hopefully improve the flaky tests situation, this also makes the e2e tests run much faster (some tests produced correct snapshots but had some logic errors causing them to loop for much longer than necessary). Add some output to the tests so it is easier to see if something goes wrong.
- remove verbose build output from e2e test build
* xtask: Implement a new build system
xtask is a cargo alias that is used to extend the cargo build system
with custom commands. For an introduction to xtask, see here:
https://github.com/matklad/cargo-xtask/
The idea is that instead of writing makefiles, xtask requires no
additional dependencies except `cargo` and `rustc`, which must be
available to build the project anyway.
This commit provides a basic implementation of the `build` and `test`
subcommands.
* xtask/deps: Add 'which'
* xtask/test: Handle error when cargo not found
* xtask/flags: Add more commands
to perform different useful tasks. Includes:
- clippy
- format
- "make" (composite)
- "install" (composite)
Also add more options to `build` to selectively compile plugins or leave
them out entirely.
* xtask/main: Return error when cargo not found
* xtask/build: Add more subtasks
- `wasm_opt_plugins` and
- `manpage`
that perform other build commands. Add thorough documentation on what
each of these does and also handle the new `build` cli flags
appropriately.
* xtask/clippy: Add job to run clippy
* xtask/format: Add job to run rustfmt
* xtask/pipeline: Add composite commands
that perform multiple atomic xtask commands sequentially in a pipeline
sort of fashion.
* xtask/deps: Pin dependencies
* xtask/main: Integrate new jobs
and add documentation.
* xtask: Implement 'dist'
which performs an 'install' and copies the resulting zellij binary along
with some other assets to a `target/dist` folder.
* cargo: Update xflags version
* xtask: Measure task time, update tty title
* xtask: Update various tasks
* xtask: wasm-opt plugins in release builds
automatically.
* xtask/build: Copy debug plugins to assets folder
* xtask: Add 'run' subcommand
* xtask: Add arbitrary args to test and run
* xtask: Rearrange CLI commands in help
* xtask: Add deprecation notice
* docs: Replace `cargo make` with `xtask`
* github: Use `xtask` in workflows.
* xtask: Add support for CI commands
* xtask: Streamline error handling
* github: Use new xtask commands in CI
* xtask: Add 'publish' job
* xtask/publish: Add retry when publish fails
* xtask: Apply rustfmt
* xtask: Refine 'make' deprecation warning
* xtask: add task to build manpage
* contributing: Fix e2e commands
* xtask/run: Add missing `--`
to pass all arguments following `xtask run` directly to the zellij
binary being run.
* xtask: Stay in invocation dir
and make all tasks that need it change to the project root dir
themselves.
* xtask/run: Add `--data-dir` flag
which will allow very quick iterations when not changing the plugins
between builds.
* xtask/ci: Install dependencies without asking
* utils: Allow including plugins from target folder
* utils/assets: Reduce asset map complexity
* utils/consts: Update asset map docs
* xtask: Fix plugin includes
* xtask/test: Build plugins first
because the zellij binary needs to include the plugins.
* xtask/test: Fix formatting
* xtask: Add notice on how to disable it
Install `cargo-make` explicitly in the workflow,
even tough it should be cached from the previous steps.
There are some corner cases in which gh messes the caching up
and can't access it.
* Added clippy check.
* Changed step name.
* Used the suggested ci config.
* Some more clippy fixes.
* Some more clippy fixes.
* More clippy fixes.
* Removed allow annotations.
* Minor lint edit.
* More clippy fixes.
* Ran cargo fmt.
* More clippy fixes.
* More clippy fixes.
* More clippy fixes.
* More clippy fixes.
* More clippy fixes.
* More clippy fixes.
* Code review edits.
* Code review edits.
* Code review edits.
* CI update.
* CI update.
* CI update.
* Added clippy warn so wip won't fail ci.
* Cargo fmt.
* fix(compatibility): various htop issues
* style(format): make rustfmt happy
* fix(logging): do not delete log dir on startup
* fix(tests): update htop with command toggle
* chore(ci): reduce test concurrency to 1
