* refactor(panes): move to parametric pane sizes
* Fixed the simpler errors by casting to usize
* The least I can do is pass the formatting check...
* Move to stable toolchain
* Well, it compiles?
* And now it doesn't! ;)
* Baseline functionality with the new Dimension type
* Working POC for percent-based resizing
* REVERT THIS COMMIT – DELETES TESTS
* Perfected the discrete resize algorithm
* Fixed fixed-size panes
* Basic bidirectional resize
* feat(resize): finalised parametric resize algorithm
* Reduce the logging level a bit
* Fixed nested layouts using percents
* Bug squishing for implicit sizing
* Here is a funky (read: rubbish) rounding approach
* And now it's gone again!
* Improve discretisation algorithm to fix rounding errors
* Fix the last layout bug (maybe?)
* Mixed explicit and implied percents work now
* Let's pretend that didn't happen...
* Make things a bit less crashy
* Crash slightly more for now (to find bugs)
* Manaually splitting of panes works now
* Start moving to percent-based resizes
* Everything but fullscreen seems to be working
* Fix compilatation errors
* Culled a massive amount of border code
* Why not pause to please rustfmt?
* Turns out I was still missing a few tests...
* Bringing back even more tests!
* Fix tests and pane boarders
* Fix the resize system without gaps
* Fix content offset
* Fixed a bug with pane closing
* Add a hack to fix setting of the viewport
* Fix toggling between shared borders and frames
* fix(tests): make e2e properly use PaneGeom
* style(fmt): make rustfmt happy
* Revert unintentional rounding of borders
* Purge some old borderless stuff
* Fix busted tab-bar shrinking
* Update E2E tests
* Finish implementing fullscreen!
* Don't crash anymore?
* Fix (almost) all tests
* Fix a lack of tab-stops
* All tests passing
* I really can't be bothered to debug a CI issue
* Tie up loose ends
* Knock out some lingering FIXMEs
* Continue to clean things up
* Change some naming and address FIXMEs
* Cull more code + FIXMEs
* Refactor of the resize system + polish
* Only draw frames when absolutely necessary
* Fix the tab-bar crash
* Fix rendering of boarders on reattach
* Fix resizing at small pane sizes
* Deduplicate code in the layout system
* Update tab-bar WASM
* Fixed the pinching of panes during resize
* Unexpose needlessly public type
* Add back a lost test
* Re-add tab tests and get them to compile
* All tabs need layouts
* Start fixing tests + bug in main
* Stabilize the resize algorithm rounding
* All tests from main are now passing
* Cull more dead code
* work
* resize working
* move focus working
* close pane working
* selection and fullscreen working
* pane title line
* titles and conditional scroll title
* whole tab resize working
* plugin frames working
* plugin splitting working
* truncate pane frame titles
* cleanup
* panes always draw their own borders - also fix gap
* toggle pane frames
* move toggle to screen and fix some bugs
* fix plugin frame toggle
* fix terminal window resize
* fix scrolling and fullscreen bugs
* unit tests passing
* e2e tests passing and new test for new frames added
* refactor: TerminalPane and PluginPane
* refactor: Tab
* refactor: moar Tab
* refactor: Boundaries
* only render and calculate boundaries when there are no pane frames
* refactor: Layout
* fix(grid): properly resize when coming back from alternative viewport
* style: remove commented code
* style: fmt
* style: fmt
* style: fmt + clippy
* docs(changelog): update change
fixes#603, fixes#349
* The layout has now a unique `tabs` section,
that can be used, like the `parts` section,
everything that is not inside the tabs section
is assumed to be present on every single tab
that is opened.
This is a BREAKING CHANGE for people that use
custom `layouts` already, since the `tabs` section
is not optional - for clarity and intentionality reasons.
The functionality to specify multiple tabs is already there,
but is still gated behind a panic, until #621 is fixed.
So for now one tab can be specified to load on startup.
* The `NewTab` action can optionally be bound to open
a layout that is assumed to be in the new `tabs` section
This is a BREAKING CHANGE for people that have the
`NewTab` action already bound in the config file:
```
- action: [NewTab, ]
key: [F: 5,]
```
must now be specified as:
```
- action: [NewTab: ,]
key: [F: 5,]
```
Optionally a layout that should be opened on the new tab can be
specified:
```
- action: [NewTab: {
direction: Vertical,
parts: [ {direction: Horizontal, split_size: {Percent: 50}}, {direction: Horizontal, run: {command: {cmd: "htop"}}},],
key: [F: 6,]
```
or:
```
- action: [NewTab: {direction: Vertical, run: {command: {cmd: "htop"} }},]
key: [F: 7,]
```
or
```
- action: [NewTab: {
direction: Vertical,
parts: [ {direction: Vertical, split_size: {Percent: 25},run: {plugin: "strider" }}, {direction: Horizontal}],}, MoveFocus: Left,]
key: [F: 8,]
```
* Initial mouse support
* enable mouse support (termion MouseTerminal)
* handle scroll up and down events
* Allow enabling/disabling of mouse reporting
Store the mouse terminal on OsInputOutput
* WIP: switch pane focus with mouse
* testing to get mouse character selection
* wip mouse selection
* wip: mouse selection
- initial handling of mouse events for
text selection within a pane
- wide characters currently problematic
- selection is not highlighted
* highlight currently selected text
* improve get currently selected text from TerminalPane
* copy selection to clipboard (wayland only for now)
* Add missing set_should_render on selection update
* Improve text selection
- Strip whitespace from end of lines
- Insert newlines when selection spans multiple lines
* Simplify selection logic
- Remove Range struct
- Selection is not an Option anymore, it's empty when start == end
* copy selection to clipboard with OSC-52 sequence
* Improve text selection with multiple panes
- Constrain mouse hold and release events to currently active pane
- Fix calculation of columns with side by side panes
* fix for PositionAndSize changes
* Fix mouse selection with full screen pane.
- Transform mouse event positions to relative when passing to pane.
* Move selection to grid, rework highlighting.
- Mark selected lines for update in grid output buffer, for now in the
simplest way possible, but can be made more efficient by calculating
changed lines only.
- Clear selection on pane resize.
- Re-add logic to forward mouse hold and release events only to
currently active pane.
* Tidy up selection
- add method to get selection line range
- add method to sort the current selection
* Grid: move current selection up/down when scrolling
- Make the selection work with lines in lines_above and lines_below
- Todo: update selection end when scrolling with mouse button being held
- Todo: figure out how to move selection when new characters are added.
* Grid: move selection when new lines are added
* Keep track of selection being active
- Handle the selection growing/shrinking when scrolling with mouse
button held down but not yet released.
* Improve selection end with multiple panes
* Tidying up
- remove logging statements, unused code
* Add some unit tests for selection, move position to zellij-utils
* Change Position::new to take i32 for line
* Grid: add unit tests for copy from selection
* add basic integration test for mouse pane focus
* Add basic integration test for mouse scroll
* Use color from palette for selection rendering
* Improve performance of selection render
- Try to minimize lines to update on selection start/update/end
* fixes for updated start method
* fix lines not in viewport being marked for rendering
- the previous optimization to grid selection rendering was always
adding the lines at the extremes of previous selection, causing problems
when scrolling up or down
- make sure to only add lines in viewport
* Disable mouse mode on exit
* use saturating_sub for usize subtractions
* copy selection to clipboard on mouse release
* disable mouse on exit after error
* remove left-over comments
* remove copy keybinding
* add default impl for selection methods in Pane
- remove the useless methods from Impl Pane in PluginPane
* move line diff between selections to selection
* add option to disable mouse mode
* Allow scrolling with mouse while selecting.
* move action repeater to os_input_output, change timeout to 10ms
- change repeater to take an action instead of a position with hardcoded
action
* replace mouse mode integration tests with e2e tests
* cleanup
* cleanup
* check if mouse mode is disabled from merged options
* fix missing changes in tests, cleanup
Add the ability to bind running commands to
an action.
Eg:
```
- action: [Run: {command: "htop",},]
key: [F: 6,]
``
Optionally the direction and arguments can be
specified:
```
- action: [Run: {command: "htop", args: ["-C",]},]
key: [F: 7,]
```
The directional splits are analogous to the `[NewPane]` splits.
```
- action: [Run: {command: "htop", args: ["-C",], direction: "Up"},]
key: [F: 8,]
```
* tests(integration): move basic integration tests to be unit tests
* fix(tests): silently fail threadbus for tests
* tests(unit): move compatibility tests to become unit tests for grid
* tests(unit): move close_pane tests to become unit tests for grid
* tests(e2e): move basic layout test to e2e
* tests(unit): move move_focus tests to be unit tests
* tests(unit): move resize_down tests to be unit tests
* tests(unit): move resize_left tests to be unit tests
* tests(unit): move resize_right tests to be unit tests
* tests(unit): move resize_up tests to be unit tests
* tests(infra): remove unused infra
* style(fmt): make rustfmt happy
* debug
* debug
* debug
* debug
* chore(test): shift volume mounting around because github actions is a special child
