118 lines
4.1 KiB
Markdown
118 lines
4.1 KiB
Markdown
nmrpflash - Netgear Unbrick Utility
|
|
====================================
|
|
|
|
This program uses Netgear's [NMRP protocol]
|
|
(http://www.chubb.wattle.id.au/PeterChubb/nmrp.html)
|
|
to flash a new firmware image to a compatible device. This utility has been
|
|
tested with a Netgear EX2700, but is likely to work on many others as well.
|
|
|
|
Prebuilt binaries for Linux, OS X and Windows are available
|
|
[here](https://github.com/jclehner/nmrpflash/releases)
|
|
([WinPcap](https://www.winpcap.org/install/default.htm) is required on Windows).
|
|
|
|
````
|
|
Usage: nmrpflash [OPTIONS...]
|
|
|
|
Options (-a, -i and -f are mandatory):
|
|
-a <ipaddr> IP address to assign to target device
|
|
-f <firmware> Firmware file
|
|
-i <interface> Network interface directly connected to device
|
|
-m <mac> MAC address of target device (xx:xx:xx:xx:xx:xx)
|
|
-M <netmask> Subnet mask to assign to target device
|
|
-t <timeout> Timeout (in milliseconds) for regular messages
|
|
-T <timeout> Time to wait after successfull TFTP upload
|
|
-p <port> Port to use for TFTP upload
|
|
-U Test TFTP upload
|
|
-v Be verbose
|
|
-V Print version and exit
|
|
-L List network interfaces
|
|
-h Show this screen
|
|
````
|
|
|
|
### Using nmrpflash
|
|
|
|
Connect your Netgear router to your computer using a network cable.
|
|
Assign a static IP address to the network adapter that's plugged into
|
|
the Netgear router.
|
|
|
|
For this example, we'll assume that your network interface is `eth0`.
|
|
First, we have to assign a static IP address to our network interface.
|
|
In this example, we'll use `192.168.1.2`. All available network interfaces
|
|
can be listed using
|
|
|
|
````
|
|
$ nmrpflash -L
|
|
eth0 192.168.1.2 f2:11:a1:02:03:b1
|
|
````
|
|
|
|
Now we can `nmrpflash`. The argument for the `-a` option needs
|
|
to be a *free* IP address from the same subnet as the one used by your
|
|
network interface. We'll use `192.168.1.254`. Firmware images can usually
|
|
be downloaded directly from netgear. For details on how to do this, see
|
|
[here](#obtaining-firmware-images). Power on your device immediately
|
|
after starting `nmrpflash`.
|
|
|
|
````
|
|
$ nmrpflash -i eth0 -a 192.168.1.254 -f EX2700-V1.0.1.8.img
|
|
Advertising NMRP server on eth0 ... /
|
|
Received configuration request from a4:2b:8c:00:00:01.
|
|
Sending configuration: ip 192.168.1.254, mask 255.255.255.0.
|
|
Uploading EX2700-V1.0.1.8.img ... OK
|
|
Waiting for remote to respond.
|
|
Remote finished. Closing connection.
|
|
````
|
|
|
|
### Common issues
|
|
###### "No suitable network interfaces found."
|
|
|
|
If you're *not* on Windows, rerun `nmrpflash -L` using `sudo`. In any case,
|
|
use `-vvvL` to see more detailed messages, and file a bug report if applicable.
|
|
|
|
###### "No response after 60 seconds. Bailing out."
|
|
|
|
The router did not respond. Try rebooting the device and run `nmrpflash` again.
|
|
You could also try running `nmrpflash` with `-m` and specify your router's
|
|
MAC address. It's also possible that your device does not support the NMRP protocol.
|
|
|
|
###### "Timeout while waiting for 0x04."
|
|
|
|
After a successful file upload, `nmrpflash` waits for up to 120 seconds for an
|
|
answer from your device. You can increase this by specifying a longer timeout
|
|
using `-T` switch (argument is in seconds).
|
|
|
|
It's entirely possible that the image was flashed successfully, but the
|
|
operation took longer than 120 seconds.
|
|
|
|
### Building and installing
|
|
###### Linux, Mac OS X, BSDs
|
|
|
|
````
|
|
$ make && sudo make install
|
|
````
|
|
|
|
###### Windows
|
|
|
|
The repository includes a
|
|
[DevCpp](http://sourceforge.net/projects/orwelldevcpp/)
|
|
project file (`nmrpflash.dev`). Download the latest
|
|
[WinPcap Developer Pack](https://www.winpcap.org/devel.htm)
|
|
and extract it into the root folder of the nmrpflash sources.
|
|
|
|
### Obtaining firmware images
|
|
|
|
Firmware images can be downloaded directly from Netgear's FTP servers.
|
|
For the Netgear EX2700 for example, download
|
|
ftp://updates1.netgear.com/ex2700/ww/fileinfo.txt. At the top there
|
|
should be an entry like this:
|
|
|
|
```
|
|
[Major1]
|
|
file=EX2700-V1.0.1.8.img
|
|
...
|
|
```
|
|
|
|
The download link for the latest firmware image for this device is thus:
|
|
ftp://updates1.netgear.com/ex2700/ww/EX2700-V1.0.1.8.img. Substitute
|
|
`ex2700` for your device (`wndr4300`, `wndr3700`, `r6100`, etc.). If
|
|
neccessary, substitute `ww` (world-wide) for a specific region.
|
|
|